Watching TV
When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you
live.
Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit.
(See
page
8.)
2. Connect the antenna cable to the
TV.
(See page 12.)
3. Plug
in
the AC cord
to
the AC outlet.
(See
page
7.)
When "Air"
is
selected
in
Antenna
setting:
Press
......
/~
to select "Start", and then press
ENTER.
Example
• The Channel search will start automatically.
• To exit the Channel search screen, select
"Cancel", and then press
ENTER.
When "Cable"
is
selected
in
Antenna
setting:
Press
~/T
to select "Analog &Digital
Search Start" to search both analog and
digital broadcasts or "Analog Search Start"
to
search only analog broadcasts, and then
press
ENTER.
Channel search
Channel auto search makes the TV look for
all
channels
viewable
in
the set area.
MENU
o
FREEZE
o
Press
~/T
to
select the desired language
listed on the screen, and then press
ENTER.
Press
......
/~
to
select "Air" or "Cable".
Press
ENTER to enter the setting.
Example
Language setting
Select from among 3 languages: English, French and
Spanish.
Antenna setting
Make sure what kind
of
connection
is
made with your
TV when selecting "Air" or "Cable".
•
•
If
no channel
is
found, confirm the type of connection made
with your TV and try
EZ
Setup again.
(See
page 22.)
@-16
To Next Page
Loading...
