Other viewing options
Allows you to capture and freeze a moving image that
you are watching.
You can operate the connected AV products
(AV
Receiver, Cable Box, SAT tuner,
DTV,
VCR
j
DVD,
LD)
using the presetting manufacturer function of your
remote control unit.
FREEZE
MENU
.~o
888
EXIT
~
RETURN
O~O
- FAVORITE CH -
0®@@
AQuas
TV
TV
VGR
g
OO
vV~~
GBL/SAT DVD
pO
0 0
SOURCE
(3
8
CB
REC
C!)
0
8
(3
AUDIO
o
FUNCTION
e
LIGHT
tfi"'
~
8
o
('ViEW)
~
Press FREEZE.
• A moving image
is
captured.
Press FREEZE again to cancel the function.
• When this function
is
not available, "No displaying still
image available." will display.
• The still image automatically goes out after 30 minutes.
•
If
you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
cancelled and a V-CHIP BLOCK message will appear.
®
INPUT
FLASHBACK
00
Presetting manufacturer codes
Press FUNCTION until the
LED
for your
device lights up.
After the
LED
for your device lights up, press
FUNCTION and DISPLAY at the same time
to enter the code registration mode. The
LED
will blink.
Press
0-9
to enter the manufacturer code.
(See
page 46.)
• Preset mode
is
finished once the LED no longer
lights up.
After registering the code, the
LED
will stop
blinking then turn off after one second.
(If
you
perform
an
incorrect operation, the
LED
will
blink quickly then turn off.)
@-45
To Next Page
Loading...
