EasyManua.ls Logo

Sharp Aquos LC-42D62U

Sharp Aquos LC-42D62U
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Useful adjustment settings
Canadian English ratings
Canadian French ratings
Press MENU
to
display the MENU screen,
and then press
......
/~
to select "Setup".
Repeat steps 1 to 4
in
Canadian English
ratings.
Press
./T
to adjust the item to your desired
position.
"Ii" indicates the item
is
blocked.
The setting automatically enters "Block" for any
ratings below your selection.
If
Status
is
not set to "On" the configuration
settings will not work.
(See
page 39.)
Example
Input the 4-digit secret number by using
0-
9.
At this time V-CHIP BLOCK temporarily
releases.
You can reactivate the temporarily released V-CHIP
BLOCK as shown below.
Method
1:
Select "Status" setting from the Parental CTRL menu
to reactivate BLOCK.
(See
page 39.)
Method
2:
Select "V-Chip" setting ("MPAA", "TV Guidelines",
"Can. English Ratings" or "Can. French Ratings")
from the Parental CTRL to reactivate BLOCK.
(See
pages 42 and 44.)
Method
3:
Switch off the TV power.
Press
..
IT
to select "Can. French Ratings",
and then press
ENTER.
When the V-CHIP BLOCK
is
working and censors a
broadcast, "V-CHIP HAS
BEEN
ACTIVATED." displays.
Press
ENTER while the V-CHIP
is
working
and then the secret number setting menu
displays.
Press
MENU to exit.
Press
./T
to select "Parental CTRL", and
then press
ENTER.
Secret number setting menu displays only when
"Secret No."
is
set.
(See
page 39.)
"V-Chip" and "Status" will not be selectable from
the menu if you
do
not first configure your secret
number.
(See
page 39.)
Input the 4-digit secret number by using
0-9.
;J.;}
Press
./T
to select "Can. English Ratings",
and then press
ENTER.
Press
./T
to
select "V-Chip", and then
press
ENTER.
Press MENU
to
exit.
Press
./T
to
adjust the item to your desired
position.
"Ii" indicates the item
is
blocked.
The setting automatically enters "Block" for any
ratings below your selection.
If
Status
is
not set to "On" the configuration
settings will not work.
(See
page 39.)
Example
Performing any of the three above will activate the V-CHIP
BLOCK.
@-44

Table of Contents

Related product manuals