Appendix
Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.
•
Do
not
remove
the
stand
from
the
TV
unless
using
an
optional
wall
mount
bracket
to
mount
it.
Before
attaching/detaching
stand
• Before performing work make sure to turn off the
TV.
• Before performing work spread cushioning over the base area to lay the
TV
on. This will prevent
it
from being
damaged.
Unfasten the four screws used
to
secure the stand
in
place.
Detach the stand from the
TV.
(Hold the stand so it will
not
drop
from the edge
of
the base area.)
• To attach the stand, perform the above steps
in
reverse order.
•
This
TV
should
be
mounted
on
the
wall
only
with
the
AN-37AG2/AN-52AG1 {SHARP}
wall
mount
bracket.
The
use
of
other
wall
mount
brackets
may
result
in
an
unstable
installation
and
may
cause
serious
injuries.
•
Installing
the
TV
requires
special
skill
that
should
only
be
performed
by
qualified
service
personnel.
Customers
should
not
attempt
to
do
the
work
themselves.
SHARP
bears
no
responsibility
for
improper
mounting
or
mounting
that
results
in
accident
or
injury.
Using
an
optional
bracket
to
mount
the
TV
• You can ask a qualified service professional about using
an
optional AN-37AG2/AN-52AG1 bracket to mount the
TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging
on
the
wall
AN-37
AG2/
AN-52AG1 wall
mount
bracket.
(See the bracket instructions for details.)
CD
0/5/1
0/15/20°
®
-5/0/+5
cm
(can be moved
5
cm
up
or
down)
For
AN-52AG1
About
setting
the
TV
angle
and
height
adjustment
Angular mounting
Vertical mounting
AN-37AG2
AN-52AG1
" Detach the cable clamps on the rear
of
the TV when using the optional
mount
bracket.
@-49
To Next Page
Loading...
