Basic adjustment settings
Press
..
IT
to select "PCM" or "Dolby
Digital", and then press
ENTER.
You can output digital audio to
an
AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is
connected to the DIGITAL AUDIO OUTPUT terminal
on the
TV.
Please select
an
audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
Press
MENU to display the MENU screen,
and then press
......
/~
to
select "Digital
Setup".
Press
..
IT
to select "Audio Setup", and then
press
ENTER.
This setting allows you to optiillize the settings of
Digital broadcasting.
Press
.....
/~
to select "Enable", and then
press
ENTER.
•
Five
minutes before the power shuts down, the
remaining time displays every minute.
Press MENU
to
display the MENU screen,
and then press
.....
/~
to select "Power
Control".
Press
MENU
to
exit.
Press
~/T
to
select "No Signal Off", and
then press
ENTER.
Power control setting allows you to save energy.
No signal off
When set
to
"Enable", the power
will
automatically shut
down
if
there
is
no signal for 15 minutes.
• "Disable"
is
the factory preset value.
• When a TV program finishes, this function may not operate.
No operation off
When set to "Enable", the power will automatically shut
down if there
is
no operation for 3 hours.
The optical output terminal outputs
audio signal
in
PCM form.
If
your
digital audio system does not support
Dolby Digital, select "PCM".
The optical output terminal outputs
audio signal
in
Dolby Digital form.
It
reproduces sound from surround
program of digital.
PCM
Dolby Digital
Press MENU
to
display the MENU screen,
and then press
.....
/~
to select "Power
Control".
Press
..
IT
to select "No Operation Off", and
then press
ENTER.
Press MENU to exit.
Press
.....
/~
to select "Enable", and then
press
ENTER.
•
Five
minutes before the power shuts down, the
remaining time displays every minute.
Press MENU
to
exit.
• "Disable"
is
the factory preset value.
@-28
To Next Page
Loading...
