Using external equipment
Press MENU to display the MENU screen,
and then press
......
/~
to select "Option".
Press
./T
to select "Input Skip", and then
press
ENTER.
Press
..
IT
to select the Input (INPUT 4 or
INPUT
5)
you wish to skip, and then press
ENTER.
This setting allows you to skip the HDMI Input on the
Input Selection operation.
Press
MENU to display the MENU screen,
and then press
~/~
to select "Setup".
To watch
an
HDMI equipment image,
select "INPUT4" or "INPUT5" from "INPUT
SOURCE" menu using
INPUT on the remote
control unit or on the
TV.
Press
..
IT
to select "HDMI Setup", and then
press
ENTER.
Press
......
/~
to select "Yes", and then press
ENTER.
Press
MENU
to exit.
Press
..
IT
to
select the desired item and
press
ENTER.
Press
..
IT
I
......
/~
to select the desired
setting and press
ENTER.
Signal
Type
RGB
YCbCr 4:4:4
YCbCr 4:2:2
Select the video signa! type from
the HDMI terminal.
Auto View Enable
Disable
Set whether
or
not
to
use
View Mode based on signal
recognition, including an HDMI
signal.
Audio
Select
Digital
Analog
Select "Digital" for
an
audio
signal via the HDMI terminal.
Select "Analog" for
an
audio
signal via the R-AUDIO
-L
terminal.
Press MENU to exit.
• Refer
to
your external equipment operation manual for the
signal type.
• "Signal Type"
is
only available
when
an
HDMI-DVI
conversion cable
is
connected.
• "Audio Select"
is
only available for INPUT
4.
• When connecting
an
HOMI-OVI conversion adapter/cable
to the HOMI terminal, the image may not come
in
clearly.
@-30
To Next Page
Loading...
