QUICK
REFERENCE
STOP! To safely remove the AQUOS television from the box
• It's best
to
use 2 people
to
remove the
AQUaS
television for stability.
• Lift onto installation location
as
the diagram illustrates.
Ventilation &Cleaning Tips
Keep your
AQUaS
television
in
a well ventilated area and make sure not
to
place it by a heat
source or use near water. The
AQUaS
television
is
designed for
AG.
use only and should be
used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe
and avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not
use liquid or aerosol cleaners.
The screen
is
glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
POWER
- VOL + V
CH
A INPUT
How
to
turn on the
AQUaS
television for the
first time.
A)
Press POWER on AQUaS television.
B)
POWER indicator on the front of the AQUaS
television lights GREEN.
------IJ
II
Attach your antenna to the back of the
AQUaS
television.
(See
page 12.)
Connect the AC plug for the
AQUaS
television into the AC outlet.
•
•
"----~\~-CJ:3
-+
IAC outlet I
• Place the TV close to the AC outlet, and keep the power
plug within reach.
POWER
SLEEP
ope
o 0 ffi 0 0
BED
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
Place the Ferrite core
in
the space indicated
in
the below figure and bundle the cords
properly with cable clamps and a cable tie.
POWER indicator
BED
• Speakers cannot be detached from the
TV.
• TV angle cannot be adjusted.
Ferrite core
@-7
To Next Page
Loading...
