QUICK REFERENCE
If the remote control fails
to
operate TV functions, replace the batteries
in
the remote control unit.
1 Open the battery cover.
2 Insert
two
"MA"
size batteries
(supplied with the product).
• Place the batteries with their terminals
corresponding to the (
+)and (- )
indications
in
the battery compartment.
3 Close the battery cover.
Improper use of batteries can result
in
chemical leakage or explosion. Be sure
to
follow the instructions below.
• Do not mix batteries of different types. Different types
of
batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage
in
old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come
in
contact with skin can cause
a rash.
If
you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due
to
storage conditions.
•
If
you will not be using the remote control unit for
an
extended period
of
time, remove batteries from
it.
Remote control
sensor
17'
(5
m)
~I~
IMPORTANT:
The POWER indicator on the AQUOS television should light GREEN indicating you have power
to
the
AQUaS
television.
If
the POWER indicator on the AQUOS television still does not light up, press TV POWER
on the remote control
to
turn the power on.
TV
TV
VCR
AUDIO
o 0 0
CBLlSAT
DVD
FUNCTION
o 0 0
SOURCE
LIGHT
8 8 rn
8 G 8
REC
C!)
0
GD
8
(3
@ID
@-s
IMPORTANT:
IF
THE UNIT DOES NOT POWER
ON
- UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT
THE INSTALLATION STEPS.
IF
YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
Please refer
to
the BASIC ADJUSTMENT SETIINGS SECTION for
EZ
Setup and basic channel setup functions
and USING EXTERNAL EQUIPMENT SECTION for other device connections
(DVD,
VCR, AUDIO, etc)
in
your
AQUOS operation manual.
To Next Page
Loading...
