Useful adjustment settings
AV MODE gives you 7 viewing options to choose from
to
best match the surrounding environment
of
the
TV,
which can vary due
to
factors like room brightness,
type of program watched or the type of image input
from external equipment.
STANDARD For a highly defined image
in
a normal
lighting
[Enhanced Picture Contrast: on]
MOVIE For a movie
[Enhanced Picture Contrast: off]
FAVORITE
o
SLEEP AUDIO
AV
MODE
CC
00.0
GAME Lowers image brightness for easier
viewing
[Enhanced Picture Contrast: off]
Press AV MODE.
• Current AV MODE displays.
Press AV MODE again before the mode
displayed on the screen disappears.
• The mode changes
as
shown below.
When the input source
is
TV, INPUT 1, 2 or 3 terminals
(Example)
PC
For PC
[Enhanced Picture Contrast: off]
USER Allows the user to customize settings
as desired. You can set the mode for
each input source.
[Enhanced Picture Contrast: off]
DYNAMIC (Fixed) Changes the image and sound
settings to the factory preset values.
No adjustments are allowed.
[Enhanced Picture Contrast: on]
..
'.'-.
+
+
+.
+
+
DYNAMIC
For a clear-cut image emphasizing
high contrast, useful for sports
viewing
[Enhanced Picture Contrast: on]
+
+
1360x768
1024x768
Press MENU to display the MENU screen,
and then press
.....
/~
to select "Setup".
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.
Some input signals may have to be registered manually
to display properly.
The pair of input signals (resolutions)
in
the list below
are not distinguishable when received.
In
such case,
you have
to
set the correct signal manually. After
setting once, it will display when the same signal
(resolution)
is
input again.
When the input source
is
INPUT 4 or 5 terminals
(Example)
---+--
+
+
JJ
+
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
• "Enhanced Picture Contrast" technology detects the source
video characteristics and smoothly adjusts the screen
brightness accordingly
to
realize deeper black levels.
Press
..
IT
to
select "Input Signal", and then
press
ENTER.
Press
..
IT
to select the desired input signal
on the display.
Press
MENU to exit.
(®-36
To Next Page
Loading...
