Sharp Aquos R3

114
Handset Settings

Data warning & limit: For the data usage volume via mobile
networks, set for the date of starting to measure or data
communication volume for generating alert on a monthly
basis.
Also, if you set [Set data limit] to ON, you can pause the data
communication when the data communication volume
reaches to the limit. You can set the limit in [Data limit].
y
When the data usage volume reaches to the limit, the
notification that mobile data is being paused is displayed.
Touch [OK] to stop data communications until the next
measurement start day. Touch [RESUME] to resume data
communication.

Wi-Fi data usage: Display the data usage volume via Wi-Fi
networks on a diagram. Also, you can check apps having
used data communication.
z
The displayed data communication volume is an approximation.
Tethering
You can use the tethering function that connects Wi-Fi
compatible devices, or PCs, etc. connected via USB cable or
Bluetooth communication to the Internet by using the handset
as an access point.
z
You can connect up to 15 devices in total at the same time: a PC
connected via USB cable, 10 Wi-Fi compatible devices and four
Bluetooth devices.
z
Before using Bluetooth tethering, register the other party's
Bluetooth device in advance (
☞
P. 144 “Using Bluetooth
function”). As for the settings on the Bluetooth device, refer to its
manual.
z
Using tethering will lead to higher packet communication
charges. We recommend you consult with your network operator.
1
In the home screen, display “app list screen”▶
[Settings]▶[Network & internet]▶[Hotspot &
tethering]
2
Select an item

Wi-Fi hotspot: Set whether to use the Wi-Fi tethering. Also,
you can set the network name, security, password, and other
settings and set whether to turn tethering off when the
handset is not connected.

USB tethering: Set whether to use the USB tethering.

Bluetooth tethering: Set whether to use the Bluetooth
tethering.