28
When inserting
1
Insert the nanoSIM/microSD Tray all the way to
the handset straight and horizontally with the
display side turned up
z
Push the A areas securely and make sure there is no space
between the handset and the card tray.
z
Insert the card tray slowly.
z
Do not insert the card tray the other way around. If you do
so, may cause damage.
z
Inserting the card tray not deeply enough may cause
impairment of the waterproof/dustproof property or prevent
the handset from functioning properly.
z
If the SIM Eject Pin is lost, a paper clip can be used as a
substitute for it.
Precautions
z
When your hands are wet or water/foreign object adheres to the
handset, do not open/close the nanoSIM/microSD Tray.
z
Close the nanoSIM/microSD Tray securely. Even a fine obstacle
(one hair, one grain of sand, tiny fiber, etc.) put between contact
surfaces may allow liquids or dust to get inside.
z
If the handset gets wet with water or other liquids with the
nanoSIM/microSD Tray opened, the liquid may get inside
causing electric shocks or malfunction. Stop using the handset,
turn off the power and contact the support phone number listed
on the Warranty Card.
z
The rubber gasket of the contact surface between the main body
and nanoSIM/microSD Tray plays an important role in
maintaining waterproof/dustproof performance. Do not remove or
scratch it. Also, prevent dust from adhering to it.
If the rubber gasket is damaged or deformed, contact the
support phone number listed on the Warranty Card.
z
Do not insert a pointed object through the nanoSIM/microSD
Tray gaps. It may cause damage to the rubber gasket and allow
liquids or dust to get inside.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
