Sharp Aquos R3

37
Before Using the Handset

Removing nanoSIM Card
z
For details on how to insert and remove the nanoSIM/microSD
Tray, refer to “Inserting and removing the nanoSIM/microSD Tray”
(
☞
P. 27).
1
Remove the nanoSIM/microSD Tray
2
Remove the nanoSIM Card from the nanoSIM/
microSD Tray
3
Turn the display side up and then insert the
nanoSIM/microSD Tray into the handset
z
Do not insert the nanoSIM Card or microSD Card into the
handset directly.
After putting the card into the card tray, insert the whole tray
into the handset.
z
Do not allow the nanoSIM Card or nanoSIM/microSD Tray to
fall when removing them.
z
When pulling out the nanoSIM/microSD Tray with the display
side turned down or the handset stood upright, the nanoSIM
Card being attached with the card tray is off and may cause
loss.
z
When handling the nanoSIM Card, make sure not to touch or
damage the IC area. Also, note that inserting or removing the
nanoSIM Card forcibly may damage it or deform the nanoSIM/
microSD Tray.
z
Refer to the nanoSIM Card user's guide for more information
on the nanoSIM Card.
z
Do not misplace the nanoSIM Card once it is removed.