Sharp Aquos R3

41
Before Using the Handset
Charging with charger
1
Insert the Type-C plug of a USB cable
horizontally into the USB Type-C Connector on
the handset
2
Insert the USB plug of USB cable horizontally
into the USB connector pin on the charger
Type-C plu
g
USB plug
3
Insert the charger into an outlet
z
The charging lamp illuminates and charging starts.
z
Even when the battery is fully charged, the charging lamp
does not turn off.
4
When charging completes, disconnect the
charger from the outlet, and horizontally
disconnect the USB plug of the USB cable from
the USB connector of the charger
5
Disconnect the Type-C plug of USB cable
horizontally from the USB Type-C Connector