18
■
Repeat Play
All tracks on up to 6 discs, or a programmed sequence can be continuously repeated.
To repeat all tracks on up to 6 discs:
Press the 0/R (0 R) button twice.
By pressing the 0/R (0 R) button after one of the s 1 - s 6 buttons is pressed,
repeat play will be performed on that disc.
To repeat a desired track:
Perform steps 1 - 4 in the “Programmed Play” section and then press the 0/R (0 R)
button twice.
To cancel repeat play:
Press the 0/R (0 R) button again.
“R” will go out.
Repeat or Random Play
■
Random Play
The tracks on the disc(s) can be played in random order automatically.
Press the RANDOM button on the remote control to begin random play.
By pressing the RANDOM button after one of the s 1 - s 6 buttons is pressed,
random play will be performed on that disc.
To cancel random play:
Press the 0R button.
Notes:
●
If you press the 2 / 4 button during random play, you can move to the track selected
next by the random operation. On the other hand, the 3 / 5 button does not allow you
to move to the previous track. The beginning of the track being played will be located.
● In random play, the CD player will select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the ■ (CD ■) button.
Otherwise, the disc(s) will play continuously.
Advanced CD Playback
– To specify a disc to Play / Repeat or Random Play –
You can play a disc by specifying the disc number.
Press one of the
ss
ss
s 1 -
ss
ss
s 6 buttons to play the desired disc.
Only the chosen disc will be played and stopped automatically.
Note:
Among discs 1 - 6, those with whitely illuminated CD indicators in the frame can be
played. However, if the button of the disc tray with no disc is pressed, playback will not
start and the indicator in the frame will go out.
To stop playback:
Press the ■ (CD ■) button.
To specify a disc to Play
Selected disc number
*BA3100_P18_19 01.2.13, 2:17 PM18
To Next Page
Loading...
Need help?
General
