Sharp CD-BA3100 User Manual

19
Advanced CD Playback
– Programmed Play –
1 While in the stop mode, press the
MEMORY/SET (MEMORY) button
to enter the programming save
mode.
2 Press one of the
ss
ss
s 1 -
ss
ss
s 6 buttons
to select the desired disc.
3 Press the
33
33
3 /
5 5
5 5
5 or
22
22
2 /
44
44
4
button to select the desired track.
4 Press the MEMORY/SET (MEMORY)
button to save the track number.
5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
6 Press the ■ (CD ■ ) button.
7 Press the
0/R 0/R
0/R 0/R
0/R (
0 R0 R
0 R0 R
0 R) button to start playback.
Note:
During program play, buttons s 1 - s 6 will not work.
Programmed Play
To clear the programmed selections:
Press the CLEAR button while the “MEMORY”
indicator is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
To cancel the programmed play mode:
While in the stop mode, press the CLEAR button. The “MEMORY” indicator will disap-
pear and all the programmed content will be cleared.
Adding tracks to the program:
If a program has been previously stored, the “MEMORY” indicator will be displayed.
Then follow steps 1 - 6 to add tracks. The new tracks will be stored after the last track
of the original program.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the 3 / 5 or 2 / 4
button.
Notes:
● Opening any tray of the programmed discs automatically cancels the programmed
sequence.
● Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another function, the programmed selections will not be cleared.
● During program operation, random play is not possible.
Up to 32 tracks can be programmed.
Selected
track number
Playback
order
Selected disc number
*BA3100_P18_19 01.2.13, 2:17 PM19

Sharp CD-BA3100 Specifications

General

Brand	Sharp
Model	CD-BA3100
Category	Stereo System
Language	English