28
The connection cable is not included.
Purchase a commercially available cable as shown below.
Enhancing Your System
To the line
output jack
Red
White
RCA cord
(not supplied)
VCR, DVD, etc.
■
Listening to the playback sounds from VCR,
DVD, etc.
1
Use a connection cable to connect the VCR, DVD, etc. to the VIDEO/
AUX jacks.
When using video equipment, connect the audio output to this unit and the
video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the VIDEO/AUX button.
4 Play the VCR, DVD, etc.
Note:
To prevent hum interference, place this unit away from a television.
Red
White
Advanced Features
– Enhancing Your System –
■
To record on a tape
1 Insert a cassette in the TAPE 2 cassette compartment.
2 Press the VIDEO/AUX button.
3 Press the REC PAUSE (
I6I6
I6I6
I6) button.
4 Press the
0/R 0/R
0/R 0/R
0/R (TAPE 2
00
00
0) button.
5 Play the VCR, DVD, etc.
■ Headphones
● Before plugging in or unplugging the headphones, reduce the volume.
● Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
● Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME control.
*BA3100_P26_28 00.12.8, 11:43 AM28
To Next Page
Loading...
Need help?
General
