14
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Preparation for Use
■
Battery installation
1. Remove the battery cover.
2. Insert the supplied batteries according to the direction indicated in
the battery compartment.
● When inserting or removing the batteries, push them towards the ë battery
terminals.
3. Replace the cover.
Precautions for battery use:
● Replace all old batteries with new ones at the same time.
● Do not mix old and new batteries.
● Remove the batteries if the unit will not be used for long periods of time. This will
prevent potential damage due to battery leakage.
Caution:
● Do not use rechargeable batteries (nickel-cadmium battery, etc.).
● Installing the batteries incorrectly may cause the unit to malfunction.
Notes concerning use:
● Replace the batteries if the operating distance is reduced or if the operation be-
comes erratic.
Purchase 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
● Periodically clean the transmitter on the remote control and the sensor on the ste-
reo system with a soft cloth.
● Exposing the sensor on the stereo system to strong light may interfere with opera-
tion. Change the lighting or the direction of the stereo system.
● Keep the remote control away from moisture, heat, shock, and vibrations.
■
Test of the remote control
Face the remote control directly to the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the
music.
0.2 m - 6 m
(8" - 20')
Remote Control
Remote sensor
To Next Page
Loading...
Need help?
General
