36
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Recording to a MiniDisc from CDs
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button and load the desired CD(s).
3
Load a recordable MiniDisc into the MD compartment, label side up.
● Whilst the system is reading the MiniDisc, the disc display will flash.
Wait until the display is steady before proceeding.
4 Press the REC MODE button and select the desired CD using
the jog dial. Within 10 seconds, press the ENTER button.
CD1 > MD to CD6 > MD : Records the selected CD only.
ALL CD > MD : Records all CDs.
MD Recording