22
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Advanced CD/MD Playback
Up to 32 CD tracks or 20 MD tracks can be programmed.
You cannot programme CD and MiniDisc tracks together at the same time.
1 (CD operation)
Whilst in the stop mode, press the CD button.
(MiniDisc operation)
Whilst in the stop mode, press the MD button.
2 Press the MEMORY button to enter the programming save mode.
CD operation: Go to step 3.
MD operation: Go to step 4.
3 Press one of the 1 - 6 buttons to select the desired disc.
4 Use the
55
55
5 or
44
44
4 button on the remote control or the jog dial on
the main unit to select the desired track.
5 Press the MEMORY button on the remote control or ENTER but-
ton on the main unit to save the track number.
6 Repeat steps 4 - 5 for other tracks. Up to 32 tracks on CDs or 20
tracks on MiniDisc can be programmed.
7 Press the ■ button.
8 Press the
06/D 06/D
06/D 06/D
06/D button to start playback.
● At this time, playback will not begin even if one of the DISC 1 - DISC 6
buttons is pressed of the CDs. (When CD programmed play.)
To clear the programmed selections:
Press the CLEAR button whilst the “MEMORY” indicator is flashing.
● Each time the button is pressed, one track will be cleared,
beginning with the last track programmed.
To cancel the programmed play mode:
Whilst in the stop mode, press the CLEAR button. The “MEMORY”
indicator will disappear and all the programmed content will be
cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEMORY” indicator will be displayed.
Then follow steps 2 - 7 to add additional tracks. The new tracks will be stored after the
last track of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the 5 or 4 button.
Notes:
● Opening any tray of the programmed discs or ejecting a MiniDisc automatically
cancels the programmed sequence.
● Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD or MD to another function, the programmed selections will not
be cleared.
● During programme operation, random play is not possible.
Selected disc number
Programmed Play
Playback order
Selected track number
Playback time
To Next Page
Loading...
Need help?
General
