Sharp CD-MD3000H User Manual

27
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
RDS Radio
Using the Radio Data System (RDS)
■
Information provided by RDS
Each time the DISP MODE button is pressed, the display will switch as follows:
Frequency
Date
(for 3 seconds)
RDS clock time
Clock-time
and date (CT)
Radio text
(RT)
Programme
type (PTY)
(English fixed)
Programme
type (PTY)
(8 Languages)
Station
name (PS)
When you are tuning in to a station other than an RDS station or to an RDS station
which sends weak signal, the display will change in the following order:
NO PS NO PTY
FM 98.80 MHz NO CT
NO RT
RDS is a broadcasting service which a growing number of FM stations provide.
These FM stations send additional signals along with their regular programme
signals. They send their station names, and information about the type of
programme such as sports or music, etc.
When tuned to an RDS station , “RDS” and the station name will be displayed.
“TP” (Traffic Programme) will appear on the display when the received broadcast car-
ries traffic information, and “TA” (Traffic Announcement) will appear whilst a traffic infor-
mation is on air (see page 33).
“EON” will appear whilst the EON (Enhanced Other Networks information) data is broad-
cast.
“PTYI” (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is
received.
“RT” (Radio Text) will appear whilst the unit receives the Radio text data.
“CT” (Clock Time) will appear whilst the unit receives the RDS CT data.
You can control the RDS by using the remote control only.

Sharp CD-MD3000H Specifications

General

Brand	Sharp
Model	CD-MD3000H
Category	Stereo System
Language	English