49
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Advanced Features
■
Timer playback/Timer recording
Before setting the timer:
Whilst the power is in the stand-by mode, p
ress the DISPLAY button
on the remote control to check that the clock is on time.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the MENU button.
3 Turn the jog dial to select “TIMER PLAY” or “TIMER REC” mode
and within 10 seconds, press the ENTER button.
For timer playback: For timer recording:
4 “ PLAY” or “ REC” will flash for 5 seconds.
Press the ENTER button during the flash.
or
5 Turn the jog dial to specify the hour to start and within 10 sec-
onds, press the ENTER button.
● The illustrations show the timer playback setting.
Timer and Sleep Operation
Timer playback:
The unit turns on and plays the desired source (CD, MD, tuner, tape) at the
preset time. At the end time, the unit enters the power stand-by mode auto-
matically.
Timer recording:
The unit turns on and starts recording from the tuner at the preset time.
At the end time, the unit enters the power stand-by mode automatically.
Continued to the next page
To Next Page
Loading...
Need help?
General
