51
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Advanced Features
Timer and Sleep Operation (Continued)
■
Sleep operation
The radio, CDs, MiniDisc and cassette tape can all be turned off automatically.
1 Play back the desired sound source.
2 Press the MENU button.
3 Turn the jog dial to select “SLEEP”.
Then press the ENTER button.
To change the sleep time:
Whilst the sleep time is displayed, turn the jog dial.
(Maximum: 2 hours - Minimum: 30 minutes)
4 Press the ENTER button.
5 Your system will enter the power stand-by mode automatically
after the preset time has elapsed.
● The volume will be turned down when the sleep operation finishes.
Note:
Once the sleep time is set, it will remain unchanged until the setting is changed.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst sleep operation is performed.
To confirm the remaining sleep time:
Perform the above steps 2 - 3.
This time you can also change the sleep time.
■
To use timer and sleep operation together
Example: To fall asleep and wake to the same radio station
You can play back the same source only (the function cannot be switched).
1 Set the desired playback or recording time (steps 1 - 9, pages 49
- 50).
2 Whilst playing the desired source, set the sleep time (see left,
steps 1 - 4).
1.Timer playback (recording) setting
2.Sleep timer setting
Timer playback
(recording) start time
30 minutes - 2 hours
Desired time
Sleep operation will
automatically stop.
An interval of 3 minutes
or more is required.
End time
To Next Page
Loading...
