57
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
References
Troubleshooting Chart (continued)
■ If trouble occurs (reset)
When this product is subjected to strong external interference (mechanical shock, ex-
cessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is oper-
ated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1. Press the ON/STAND-BY button to enter the power stand-by mode.
2. Whilst pressing down the VOLUME
XX
XX
X button, press the ON/STAND-BY but-
ton until “ALL CLEAR” appears.
Caution:
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD or MiniDisc programme.
■
Condensation
Sudden temperature changes, storage or operation in an extremely humid environ-
ment may cause condensation inside the cabinet (CD pickup, tape heads, etc.) or
on the transmitter on the remote control.
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on the transmitter
with a soft cloth before operating the unit.
■ Before transporting the unit
Remove all CDs and the MiniDisc from the unit. Your unit checks whether there are
any discs inside the unit. “CD NO DISC” and “MD NO DISC” appear if no disc is left.
Then, set the unit to the power stand-by mode. Carrying the unit with discs left inside
can damage it.
To Next Page
Loading...
Need help?
General
