3) Printer List
After searching for printers, the "Select Printer" will automatically pop up. Users can select
the found printer or add printer by manually adding IP or Host Name.
Note: • If the printer name does not appear under Detected Printer, please click Refresh
and search for printers on the network.
• If you know the IP address of the printer to be connected, you can select Specify
an IP Address for Installation to enter the printer's IP address for connection.
4) Printer Installation Interface
Click on "Next" in the "Printer List" interface, the program will enter the "Printer Installation"
interface. After the installation is completed, it will enter the "Installation Complete" interface.
This will exit in 3 seconds and set the printer as default.
To Next Page
Loading...
Need help?
General
