4) Press direction key "▲" or "▼" to select "1min", "5min", "15min", "30min", "60min", or
"8hrs".
Note: • Pressing any button or sending any print job will wake it up when the printer is
in Sleep mode.
6.3. Auto shut-off setting
“Auto shut-off setting” to set off condition and turn off delay of the printer.
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "1. System Setting" option.
3) Press direction key “▲” or “▼” to select options of “3. Auto offset”, press “OK” to set off
condition and turn off delay.
Note:
Set auto off condition:
• Shutdown under no-port state (default configuration): no port is connected,
Wireless LAN function deactivated, printer is under standby or sleep mode.
• Shutdown under idle state: the printer is under standby or sleep mode.
• If auto off condition is satisfied, printer is now off.
• After printer is off, power consumption is 0.5W or lower.
• Individual countries (or regions) do not support auto-off setting.
To Next Page
Loading...
Need help?
General
