8.2.2. Replace Laser Toner Cartridge
Note: Before replacing the laser toner cartridge, please pay attention to the following:
• The laser toner cartridge surface may have toner. Please remove it carefully to
avoid spilling.
• Put the removed laser toner cartridge on a piece of paper to avoid the toner
from accidentally spilling.
• After removing the protective cover, please immediately install the laser toner
cartridge into the printer, so as to avoid photosensitive drum damage caused by
exposing to too much direct sunlight or indoor light.
• When installing the laser toner cartridge, do not touch the surface of the
photosensitive drum so as not to scratch it.
The steps of replacing the laser toner cartridge are shown below:
1. Turn off the printer.
2. Open the front cover and remove the empty laser toner cartridge along the guides.
3. Open the package of a new laser toner cartridge, hold the handle of the cartridge and gently
shake around 5-6 times, to make the toner evenly distributed inside the cartridge.
To Next Page
Loading...
Need help?
General
