Note: • After launching the configuration tool, the Network List interface appears with
the information found by the program, e.g., the name of the wireless network,
which is sorted by SSID. Users can select an item in the list and then double-
click or click Next to enter the Information Input interface.
• "Enter SSID Manually": click to switch to the Enter SSID Manually interface, i.e.,
Step 3.
• "Refresh": Searching for wireless network information again.
• "Next": Enter the Information Input interface.
• "Cancel": The prompt of cancellation appears after clicking it. As shown below
(click "OK" to exit, otherwise stay at the original interface).
3) Enter SSID Manually
Click "Enter SSID Manually" to switch to the interface of manually entering the SSID.
Enter the SSID for the printer to be connected in the "SSID" bar.
Click Print Wireless Network Information Page to print the list of wireless networks detected
by the printer.
To Next Page
Loading...
Need help?
General
