b. Print
The contents of the programmingare printed on the
receipt/journalpaper. The print format is shown below.
The logo and date printed are the same as those printed on
the receipt.
12345678901 2345678901
#0290
SEND
PRINT
DATA
NO
SEND REPORT DATA
YES
LOAD
RAM DATA
YES
DUMP RAM
DATA
NO
?lfisI? and ItNo!t
showthecontents
of theprogramming.
(2) Programmingof master/slaveassignmentand the slave
terminalnumber
It can be specifiedby this programmingwhether to use the
ER-31OO as the master or a slave.
Also,
the terminalnumber
of the ER-31OO can be specifiedby this programmingwhen it
has been programmed to work as a slave.
a.
Programmingprocedure
Perform the programmingin the PGM mode by using the
followingprocedure.
ABCD
is set to “0001”
(the slave terminal
number is set to
“1”)
when master resetting
is taken.
–23–
To Next Page
Loading...
