Table 6
A
Automatic sending of the ER-OFF command No/Yes
1/0
B Master/Slave 1/0
CD Slave terminal number
Note: When B=l, key in “00” for CD.
The terminal number of the master is fixed at “PC”
(50H 43H).
b. Print
The contents of the programmingare printed on the
receipt/journalpaper. The print format is shown below.
The logo and date printed are the same as those printed on
the receipt.
12345678901 23456789ol
#0291
AUTOMATIC ER–OFF YES
MACHINE
SLAVE
TERMINAL NO.
05
t?~slf and ttNoIl
showthecontents
of theprogramming.
-When theER-31OOis
prograsumedas the
master,
“MASTER”
iS
printedin placeof
tls~~rle
(3) pr~gra~ifigOf the start and end codes
The start and end codes of the data block can each be
specified in up to three digits by this programming. If
“000” is specified for each of the codes, the data block is
provided with neither the start code nor the end code.
–24–
To Next Page
Loading...
