Sharp ER-A450T - Page 18

No Procedure on P.C. side No Procedure on ER-A450T side
1
Install "02FD.EXE" on the P.C.
ALL RAM Data UpLoad : Go to "2"
ALL RAM Data DownLoad : Go to "9"
2 ALL RAM Data UpLoad ( ER-A450T -> PC ) 2 Place the SRV key in the SRV mode.
3
"Execute "02FD.EXE" on P.C"
*Don’ t execute the other Software at the same time.
4
Set the Communication method by "Setting" Button."
Push "OK" Button.
5
Push "POS -> PC" Button.
And Select the Receiving File.
6
Entry of JOB#996 in the SRV mode
ER-A450T shows
7
Communication starts.
8
UpLoad is completed.
The initial Window is shown.
"Push "Exit" Button."
8
UpLoad is completed.
9 ALL RAM Data Download ( PC -> ER-A450T ) 9 Place the SRV key in the SRV mode.
996 CA/AT
@/FOR
00000