LC-40/46/52LE820E, LC-40/46LU820E
4 – 16
[4] Caution Cleaning Glass
1. Glass handling
CAUTION: (1) As for handling, wear clean gloves, protective footwear
and mask.
(2) Inner gloves are covered in the Nitrile gloves.
(3) Nitrile gloves are exchanged with the following
standard.
• When it touched a face and so on.
• When another work was done.
• By the work of fifty times.
• In the time for recess.
• When it became dirty.
• When it tore.
(4) It has a black mask part.
You must not have a clear surface.
(5) Two people have handling equally by the work.
(Maintain it so that glass is not warped.)
(6) When it is put horizontally, it is put on the flat mat.
(7) A cushion material is put between glass.
It doesn't touch it [the front and the front].
It can be put to two glass.
(8) It has a module part before the CAB-B installation.
(It has a module part.)
mask
protective footwear
Inner gloves
Nitrile gloves
Inner gloves Nitrile gloves
changed to new Nitrile gloves
flat mat
glass
glass
glass
cushion material
flat mat
A module isn't added.
You must not have it.
To Next Page
Loading...
Need help?
General