7-66
SYSTEM SETTINGS
Contents
*1 When a stand/1 x 500 sheet paper drawer / stand/2 x 500 sheet paper drawer is installed.
*2 When a finisher is installed.
*3 When a punch module is installed.
*4 When a colour-related problem has occurred.
Copy Settings
● Registration Adjustment
7-96
X Auto Adjustment –
● Optimization of the Hard Disk – 7-96
● Tandem Connection Setting
7-96
X IP Address of Slave Machine 0.0.0.0
X Port Number 50001
X Disabling of Master Machine Mode Disable
X Disabling of Slave Machine Mode Disable
● Clear All Job Log Data – 7-96
● Detect Standard in Auto Colour Mode 3 7-97
● Fusing Control Settings 60 - 89 g/m
2
(16 - 23 lbs.) 7-97
Item Factory default setting Page
■ Copy Settings
7-98
● Initial Status Settings
7-98
X Colour Mode Full Colour
X Paper Tray Varies depending on the machine configuration
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output Varies depending on the machine configuration
X Return to the Factory Default Setting –
● Exposure Adjustment
7-98
X Colour
Document Glass 5
Document Feeder 5
X B/W
Document Glass 5
Document Feeder 5
● Rotation Copy Setting Enable 7-98
Item Factory default setting Page
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
