7-68
SYSTEM SETTINGS
Contents
Printer Settings
* When the PS3 expansion kit is installed.
Item Factory default setting Page
■ Printer Settings
7-104
● Default Settings 7-104
X Prohibit Notice Page Printing Enable 7-104
X Prohibit Test Page Printing Disable 7-104
X A4/Letter Size Auto Change Varies depending on country and region. 7-104
X Print Density Level
7-104 Colour 3
B/W 3
X CMYK Exposure Adjustment 0 7-104
X Bypass Tray Settings 7-104
Enable Detected Paper Size in Bypass Tray Disable 7-104
Enable Selected Paper Type in Bypass Tray Enable 7-104
Exclude Bypass-Tray from Auto Paper Select Disable 7-104
X Job Spool Queuing Enable 7-104
● Interface Settings 7-105
X Hexadecimal Dump Mode Disable 7-105
X I/O Timeout 60 sec. 7-105
X Enable USB Port Enable 7-105
X USB Port Emulation Switching PCL (Auto*) 7-105
X Enable Network Port Enable 7-105
X Network Port Emulation Switching PCL (Auto*) 7-105
X Port Switching Method Switch at End of Job 7-106
● Colour Adjustments 7-106
X Auto Colour Calibration – 7-106
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
