3-77
PRINTER
Contents
CHANGING TO ANOTHER PAPER SIZE AND
PRINTING WHEN PAPER RUNS OUT
If printing stops because the machine ran out of paper, or if the size of paper specified in the printer driver is not loaded
in the machine, a message will appear in the touch panel. Printing will begin automatically when the [OK] key is touched
and paper is loaded in the machine. If you wish to print on paper in another tray because the desired size of paper is not
immediately available, follow the steps below.
1
Touch the [JOB STATUS] key ( ).
2
Display details on the print job for which
there is no paper.
(1) Touch the key of the job for which "Paper
Empty" appeared.
(2) Touch the [Detail] key.
3
Touch the [Paper Select] key.
4
Touch the key of the tray that has the
paper you wish to use.
Printing begins.
If you changed to a different paper size, printing may not take place correctly; for example part of the text or image may run
off the paper.
Computer01 020 / 001
Paper Empty
Priority
Spool
Job Queue
Complete
Detail
Stop/Delete
1
1
Print Job
Scan to
Fax Job
Internet Fax
Job Queue
Sets / Progress Status
(1)
(2)
Detail
OK
Computer01 020 / 000 Paper Empty
Data : File-01.tiff
Colour / B/W : Full Colour
Paper :
A3
Plain
Paper Select
Document
Style:
Special
Modes:
Output :
2-Sided
(Book)
Detail
OK
Computer01 020 / 000
Paper Select
Plain
Plain
Plain
A4
Plain
1.A4
2.A4R
4.A3
3.B4
Plain
Paper Empty
Paper Tray
Bypass Tray
To Next Page
Loading...
Need help?
General
