Sharp MX-2314N User Manual

3-80
PRINTER
Contents
PRINTER SPECIFICATIONS
*1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*2 Barcode font kit is required.
*3 When the XPS expansion kit is installed.
*4 Required when there is insufficient memory to handle certain print data. Must be used when the XPS expansion kit
is installed.
*5 MX-2314N only
*6 On the MX-2314N, the productivity kit is required.
Type Built-in
Continuous printing speed
MX-2314N: 23 pages/min
MX-2614N: 26 pages/min
MX-3114N: 31 pages/min
(When printing same document continuously on A4 (8-1/2"x11") plain paper in non-offset mode,
excluding processing time.)
Printing resolution 600x600 dpi, 9600 equivalent x 600dpi
Printer driver type PCL6, PostScript 3 compatible*
1
, XPS*
3
, Sharp Advanced Printing Language-c*
5
Supported protocols TCP/IP, IPX/SPX, NetBEUI, EtherTalk*
1
Supported client PC
operating systems
See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide.
Fonts
PCL6 80 European fonts, 28 barcode fonts*
2
, 1 bitmap font
PostScript 3 compatible*
1
136 European fonts
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)
Memory
Standard system memory: 1GB*
6
Expansion memory: 2GB*
4
*
6
Print area
Entire page excluding margin of 4.2mm (11/64") at each edge. The actual print area may vary
depending on the printer driver and the software application.

Sharp MX-2314N Specifications

General

Print Technology	Laser
Print Speed	23 ppm
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	23 cpm
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Duplex Printing	Yes
Connectivity	USB, Ethernet
Functions	Print, Copy, Scan, Fax
Paper Size	A3, A4, A5, B4, B5
Max Paper Size	A3
Original Size	A3