Sharp MX-B402

1-67
BEFORE USING THE MACHINE
Contents
CLEANING THE AUTOMATIC DOCUMENT
FEEDER ROLLERS
If you find that originals fed through the automatic document feeder misfeed or are soiled by the rollers, remove the
rollers and clean them. If misfeeds or soiling continue to occur, replace the rollers.
Before starting, remove any originals from the automatic document feeder.
1
Press the [POWER] key ( ) on the
operation panel to turn off the panel
power, and then switch the main power
switch to the off position.
2
When using the MX-B402
When using the MX-B402SC
Open the document conveyor cover on
the automatic document feeder.