Sharp MX-B402

1-72
BEFORE USING THE MACHINE
Contents
8
Clean the laser unit.
(1) Point the cleaner down and slowly insert
the tool into the hole that you wish to clean.
The parts of the writing unit that require cleaning are
indicated by labels similar to (A).
(2) Insert the cleaning tool all the way into the
hole and then pull it back out.
Pull the cleaning tool out until you feel the tip of the tool
leave the cleaning surface of the laser unit.
(3) Repeat step (2) two or three times and then
remove the cleaning tool.
9
Replace the cleaning tool.
10
Install the toner collection container.
☞
REPLACING THE TONER COLLECTION
CONTAINER (page 1-55)
(A)
(1)
(2)