7-24
SYSTEM SETTINGS
Contents
Settings
Item Description
Program Number
Set the number to be assigned to the program. The lowest available number is
automatically entered. To change the number, enter a number from 01 to 48. A
number that has already been stored cannot be used.
Program Name Enter a maximum of 36 characters for the program name.
Address
Select the address(es) to be used in the program from the address book. Up to 500
destinations can be stored in one program.
Address Book screen This displays a list of the currently stored addresses.
Condition Settings Touch the [Setup] key to open the condition settings screen for an address.
Address Mode Setting
Select the mode in which the address is used (Internet fax, scan, etc.) When a mode
is selected, the settings for that mode appear.
Mode Settings
Frequently used settings can be stored in the same way as when they are selected
for a mode.
To Next Page
Loading...
