Sharp MX-C310

JOB LOG ERROR CODES
SHARP
44
PRINTER
Error
Job Log / Status Monitor Message
Comment
0251
The requested job could not be
completed correctly due to the following
reason:
(Folding Unit: Incorrect paper size)
0252
0257
The requested job could not be
completed correctly due to the following
reason
(Incorrect paper size)
0258
(Incorrect paper type)
0259
(Tandem Printing: Busy)
025A
(Staple: Slant staple cannot be used)
0301
The requested job was interrupted due
to the following reason:
(No paper)
0302
(No toner)
0303
(Cover open)
0304
(Paper jammed)
0305
The requested job was interrupted due
to the following reason:
(No staple)
0306
(Replace consumables)
0307
(Staple: Too many pages)
0308
(Staple: Change paper size)
030B
(Selected input tray: No function)
030C
(Selected input tray: Prohibited)
030D
(Selected output tray: Failure)
030E
(Selected output tray: Full of paper)
030F
(Selected output tray: Prohibited or failure)
0310
(Selected output tray: No function)
0311
(Manual-feed printing) Insert paper in Bypass
tray
0312
(Off-line)
0313
(Printer error) Please ask your administrator.
0314
0315
0316
0317
(Account code exceeded the limit)
0319
(Staple jammed)
031B
(Selected paper cannot be used)
031C
(Input Tray: Open)
031D
(Finisher: Off-line)
031F
(Document filing: Incorrect folder password)
0320
(Number of allowed pages exceeded the limit)
0321
(Print quality: Conflict of setting parameter)
0322
(No staple unit)
0326
(Staple Compiler: Not empty)
0327
(Incorrect paper type)
0328
(Staple: Slant staple cannot be used)
0329
(Staple Compiler: Not empty)
0330
(Staple Compiler: Not empty)
0404
(2-sided printing: Failure)
0405
(2-sided printing :Prohibited)
0406
(2-sided printing: No function)
0407
(Retention printing: Hard disk full or memory
full)
0408
(Retention printing: No of jobs exceeded the
limit)
0409
(Incorrect account number)
040A
(Selected output tray: Prohibited)