Job Log / Status Monitor Message
The requested job was interrupted due
to the following reason:
(Retention printing: No function)
(PS is not available) Please check the print
driver.
(Account code exceeded the limit)
(Selected input tray: No function)
(Selected input tray: Prohibited)
(Incorrect setting parameter)
(Data format is not supported)
(Selected paper cannot be used)
(Carbon Copy: Incorrect setting parameter)
(Covers/Inserts: Incorrect setting parameter)
(Document filing: Selected folder does not exist)
(Document filing: Incorrect folder password)
(Document filing: No. of jobs exceeded the limit)
(Covers/Inserts: Prohibited)
(Output tray: Prohibited or failure)
(Disabling of Sharing Mode)
(Disabling of Confidential Mode)
(Disabling of Storing to the selected folder)
The requested job was cancelled due to
the following reason:
(Disabling of Document Filing)
(Disabling of Print Jobs other Than Hold Job)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Sharing Mode)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Confidential Mode)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Storing to the selected folder)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Document Filing)
(Disabling of Print Jobs other Than Hold Job and
Disabling of Quick File Mode)
(Retention printing: Prohibited)
(Hard disk full or memory full)
(Number of allowable pages exceeded the limit)
(Print quality: Conflict of setting parameter)
(PCL is not available) Check the printer driver.
(SPLC is not available) Check the printer driver.
(PDF is not available) Check the printer driver.
You don't have the authority to use this
function. The requested job was
cancelled due to the following reason:
(Colour mode: Disabling of full colour)
(Colour mode: Disabling of B/W)
(Colour mode: Disabling of B/W and full colour)
(Only 2-sided print approved)
(1-sided/2-sided print disabled)