Sharp MX-M350 - Page 187

To Next Page

To Previous Page

MX-M350/M450 N/U SIMULATION 9 - 48

Operation/Procedure

1) Select the number corresponding to one of the following

adjustment items with 10-key. (Select one of 0 - 11.)

∗ Normal mode (Image density adjustment level)

∗ Normal mode (Image density adjustment level) (Half-tone

mode)

∗ Auto mode

∗ Auto mode (Half-tone mode)

2) Press [START] key.

3) Enter the image density adjustment value with 10-key.

4) Press [START] key or press [P] key.

The adjustment value is set.

NOTE: Only the set value is changed and no printing is performed.

Operation/Procedure

1) Select the number corresponding to one of the following

adjustment items with 10-key. (Select one of 0 - 11.)

∗ Normal mode (Image density adjustment level)

∗ Normal mode (Image density adjustment level) (Half-tone

mode)

∗ Auto mode

∗ Auto mode (Half-tone mode)

2) Press [START] key.

3) Enter the image density adjustment value with 10-key.

4) Press [START] key or press [P] key.

The adjustment value is set.

NOTE: Only the set value is changed and no printing is performed.

46-24

Purpose Adjustment

Function

(Purpose)

Used to adjust the scanner exposure level in the

super fine text mode.

Item Picture quality Density

Item

Set

range

Default

0 AUTO Auto 0 - 99 50

1 1.0 Exposure level 1

2 2.0 Exposure level 2

3 3.0 Exposure level 3

4 4.0 Exposure level 4

5 5.0 Exposure level 5

6 AUTO (H) Auto (Half-tone)

7 1.0 (H) Exposure level 1 (Half-tone)

8 2.0 (H) Exposure level 2 (Half-tone)

9 3.0 (H) Exposure level 3 (Half-tone)

10 4.0 (H) Exposure level 4 (Half-tone)

11 5.0 (H) Exposure level 5 (Half-tone)

Select other than 0 - 11, and

press [START] key.

Press [START] key, or

press [SYSTEM SETTINGS] key.

SIMULATION 46-24

EXP.LEVEL SETUP SCANNER(SUPER FINE). SELECT 0-11,AND

PRESS START.

0.AUTO 50 1.1.0 50 2.2.0 50

3.3.0 50 4.4.0 50 5.5.0 50

6.AUTO(H) 50 7.1.0(H) 50 8.2.0(H) 50

9.3.0(H) 50 10.4.0(H) 50 11.5.0(H) 50