7
This chapter provides information that you should know before using the image send function of the machine.
IMAGE SEND FUNCTION OF THE MACHINE
The image send function of the machine can be used to send a scanned document by a variety of different methods.
The modes and transmission methods that can be used are explained below.
☞SENDING AN IMAGE IN SCAN MODE (page 36)
Scan to E-mail
The scanned file is sent by e-mail.
Scan to FTP
The scanned file is sent to a specified directory of an FTP server.
When the file is sent, it is also possible to send an e-mail to a previously stored e-mail
address to inform the recipient of the location of the file. (This is called "Scan to FTP
(Hyperlink)".)
Scan to Desktop
The scanned file is sent to a specified folder on your computer.
To use Scan to Desktop, software must be installed from the "Sharpdesk/Network Scanner
Utilities" CD-ROM that accompanies the network scanner expansion kit. For the system
requirements of the software, see the manual (PDF format) or the Readme file on the
CD-ROM. For the installation procedure, see the "Sharpdesk Installation Guide" that
accompanies the network scanner expansion kit.
Scan to Network Folder
The scanned file is sent to a shared folder on a Windows computer on the same network as
the machine.
1
BEFORE USING THE IMAGE
SEND FUNCTION
To use the image send function of the machine, an expansion kit is required for each mode. See "Required expansion kits"
(page 5).
Scan modes
To Next Page
Loading...
Need help?
General
