PN-K321/K322B SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4 - 3
2. AGING
1) Enter the "SERVICE MENU 2" mode.
2) Select "AGING" with [VOL+ ()][VOL- ()] buttons, and press [ENTER] button.
3) Select "AGING1" or "AGING2" with [VOL+ ()] [VOL- ()] buttons, and press [ENTER] button. The aging is started.
AGING1: Every time when [BRIGHT+ ()] button is pressed, the whole screen color is changed.
AGING2: The whole screen color is changed every 2 sec.
4) To terminate aging, turn off the main power source.
<MEMO>
Press the [MENU/ENTER] and the [INPUT/RETURN] button for about 5 seconds (the LED blinks, or the "F" mark is displayed in the upper
left corner of screen.), or, press the [BRIGHT- ()], [BRIGHT+ ()], [BRIGHT- ()] and [BRIGHT+ ()] buttons in sequence with pointing
the cursor to the [Other] menu. AGING1 is directly executed by pressing [VOL- ()], [VOL+ ()], [VOL- ()], and [VOL+ ()] buttons in
sequence.
*The power button of the machine cannot terminate aging.
To Next Page
Loading...
Need help?
General
