Sharp SF-2314 Service Manual

NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
1
Is the toner
density reference value
recorded?
Use Sim 43-1 to set the
fusing temperature
Use Sim 21-1 to set the
maintenance cycle to the
specified value
Use Sim 26-6 to set the
desitination specifications
Use Sim 26-13 to set the
operation mode in warm-up
Is the copy
density adjustment
value recorded?
Use Sim 46-1/51-6 to set the
copydensity adjustment value
Is the vertical
copy magnification
ratio adjustment value
recorded?
Use Sim 48-1 to the vertical
copy magnification ratio
adjustment value
Is the
horizontal copy magnification
ratio adjustment value
recorded?
Use Sim 48-2 to set the
horizontal copy magnification
ratio adjustment value
Is the vertical
copy magnification
ratio adjustment value
in zoom copying
recorded?
Use Sim 26-8 to set the vertical
magnification ratio adjustment
value in zoom copying
Is the adjustment
value of contact pressur
between the main body resist
roller and the copy paper
recorded?
Use Sim 51-2 to set the adjustment
value of contact pressure between
the main body resist roller and the
copy paper
2
Make a copy and
adjust the copy
density (Sim 46-1/
51-6)
Make a copy and
adjust the vertical
magnification ratio
Make a copy and
adjust the horizontal
copy magnification ratio
Make a copy amd adjust
the vertical magnification
ratio in zoom copying
Make a copy and adjust the
contact pressure between
the main body resist roller
and the copy paper
Use Sim 25-2 to set the
toner density reference value
Set the model with Sim 26-1.
Set to the manual paper
feed mode with Sim 26-12.
Set to the correction
mode with Sim 44-1.
Execute Sim 47.
Set the temperature in the
power save mode with Sim 43-2.
Enter the toner density
reference value with Sim 73-1.
10 – 2

Sharp SF-2314 Specifications

General

Brand	Sharp
Model	SF-2314
Category	Copier
Language	English