Sharp UX-1300 User Manual

INSTALLING THE IMAGING FILM
Rotate the printing head frame back
down, and press down on the "PUSH"
mark in the center of the frame until the
frame clicks into place. Close the printing
compartment cover.
Initialize the film by pressing the FUNC -
TION key, the "6" key, and the "#" key
on the operation panel. Make sure that
"INITIALIZE FILM" appears in the dis-
play, and then press the START key.
FUNCTION
e You must initialize the film to make the
machine wind it to the starting position
for printing. If this is not done, the first
pages you print will come out blank.
When to replace the imaging film
The sample roll of imaging film provided with your fax is capable of printing
approximately 90 pages of letter size paper. When it is used up, "FILM END " will
appear in the display. Replace it with the following imaging film, which is available
at your dealer or retailer.
UX-10CR Imaging Film
One roll of UX-10CR imaging film is capable of printing approximately 660 pages of
letter size paper.
Caution!
The text of documents printed with the imaging film is visible on the used film. If
confidential information has been printed, dispose of the film appropriately.
INSTALLATION 1-5

Sharp UX-1300 Specifications

General

Brand	Sharp
Model	UX-1300
Category	Fax Machine
Language	English