Sharp UX-1300 User Manual

OTHER FUNCTIONS
Note: If needed, you can change the transfer number from a remote location. See
"Other remote operations" in the previous section, "Remote operations".
Recording the transfer message
The transfer message plays when you answer the telephone, and informs you that
the call is a transfer call. It can be up to 15 seconds long. To record a transfer
message, follow the steps described in "Recording an outgoing message" in
"Answering Machine Set-up" in Chapter 2. The following is an example:
"Hello. This is a transfer call for (YOUR NAME). Enter your remote code number
now."
Note: If needed, you can record the transfer message from a remote location. See
“Other remote operations" in the previous section, "Remote operations".
Turning the Transfer function on and off
1 FUNCTION Press the keys shown at left. "T.A.D.
» 0, SETTINGS" will appear in the display.
oS
Press the keys shown at left. "TRANS-
FER FUNC" will appear in the display.
Press "1" to turn the Transfer function
on, or "2" to turn it off. (If you pressed
"2", go to Step 5.)
4 Enter the number of the box for which
} you want the Transfer function to oper-
ate (for the General Box, enter "0").
(Example)
5 STOP Press the STOP key.
4-14 USING THE ANSWERING MACHINE

Sharp UX-1300 Specifications

General

Brand	Sharp
Model	UX-1300
Category	Fax Machine
Language	English