Sharp UX-1300 User Manual

Your fax has three modes for receiving incoming calls and faxes:
TAD mode: Select this mode when you are out and want the built-in answering
machine to answer all calls. Voice messages will be recorded, and fax messages
will be received automatically. ("TAD" stands for "Telephone Answering Device".)
TEL mode: Select this mode when you are in and want to receive both voice calls
and fax messages on the same line. You must answer all calls, including fax
messages, using the fax’s handset or an extension phone connected to the same
line.
FAX mode: Select this mode when you only want to receive fax messages on your
line. The fax will answer all calls and receive incoming fax messages automatically.
Setting the reception mode
RECEPTION
MODE FUNCTION RESOLUTION
O O
—_()}———>
Set the mode of reception with the
RECEPTION MODE key on the panel.
e To select TAD, press the key until
"GENERAL OGM PLAY" appears in
the display ("TAD" will appear after the
general outgoing message plays).
e To select TEL, press the key until
"TEL" appears in the display.
e To select FAX, press the key until
"FAX" appears in the display.
Note: TAD mode cannot be selected unless a general outgoing message has
been recorded as described in "Answering Machine Set-up" in this chapter.
2-8 INITIAL SETTINGS

Sharp UX-1300 Specifications

General

Brand	Sharp
Model	UX-1300
Category	Fax Machine
Language	English