Sharp UX-1300 User Manual

ANSWERING MACHINE SET-UP
Programming a passcode
A 3-digit passcode can be programmed for each of the boxes. If this is done, the
passcode must be entered before messages in the box can be listened to or
erased. Program a new passcode or clear a previously programmed passcode by
pressing the panel keys as shown below.
# The numbers "1", "2", and "3" cannot be selected for the first digit of the
passcode.
1 FUNCTION Press the keys shown at left. "T.A.D.
SETTINGS" will appear in the display.
2 p - = Press the keys shown at left. "BOX
PASSCODE’ will appear in the display.
3 Press "1" to enter a passcode, or "2" to
or clear a previously programmed
passcode.
4 Enter the number of the box for which
you want to program or clear a
passcode by pressing the appropriate
numeric key.
(Example) If you are clearing a passcode, go to
Step 6.
5 Y Enter a 3-digit passcode by pressing the
J number keys.
(Example)
6
STOP Press the START key and then the
STOP key.
Noite: To ensure confidentiality, passcodes cannot be checked. If you have forgot-
ten a passcode, clear it and program a new one.
2-12 INITIAL SETTINGS

Sharp UX-1300 Specifications

General

Brand	Sharp
Model	UX-1300
Category	Fax Machine
Language	English