Sharp UX-1300

ANSWERING MACHINE SET-UP
Setting ICM time
Incoming messages (ICMs) are the messages which callers leave for you on the
built-in answering machine. The answering machine is set at the factory to allow
each caller a maximum of 4 minutes to leave a message. If desired, you can
change this setting to 15, 30, or 60 seconds.
Press the keys shown at left. "T.A.D.
1 FUNCTION
» SETTINGS" will appear in the display.
Press the keys shown at left. "ICM RE-
CORD TIME" will appear in the display.
3 Press a numeric key to select the de-
sired ICM recording time:
e "1": 15 seconds
e "2": 30 seconds
(Example)
e "3": 60 seconds
e "4": 4 minutes
4 a Press the STOP key.
2-14 INITIAL SETTINGS