Sharp UX-1300

ANSWERING MACHINE SET-UP
(OF: 1] ITalem r= 1a sm Orel aline) me(si(cleatleye
When a caller hangs up, the central telephone exchange will issue a signal called a
Calling Party Control (CPC) signal. The built-in answering machine has been set to
detect this signal, and this allows it to immediately stop recording when a caller
hangs up, thereby saving memory space and freeing you from having to listen to
long periods of silence when you play back your messages.
However, if you are a subscriber to such telephone services as Call Waiting or Call
Forwarding, signals used by these services may be mistaken for a CPC signal,
causing the machine to hang up during a call. In this case, follow the steps below to
turn off CPC detection.
Note: CPC detection may not operate properly in some telephone exchanges. For
this reason, periods of silence and/or telephone company signals may be re-
corded even if CPC detection is turned on.
1
FUNCTION
Press
the
keys
shown
at
left.
"T.A.D.
SETTINGS"
will
appear
in
the
display.
2 Press the keys shown at left. "CPC DE-
-) (. : TECTION" will appear in the display.
Press "1" to turn CPC detection on, or
or "2" to turn it off.
4 Press the STOP key.
2-16 INITIAL SETTINGS